User Manual

434
────────────────────────────────────────────────────
16.3 Waveform GO/NG Evaluation
────────────────────────────────────────────────────
1
6.3.2 Setting the Waveform Evaluation Mode
Screen: STATUS1 (MEM
)
: STATUS2 (FFT)
Move the flashing cursor to the position
shown in the figure on the left.
Make the setting with the function keys.
：Disable waveform evaluation.
Selection
Selection
Method
Method
：Return NG if any part of the
waveform leaves the evaluation
area.
：Return NG if the entire waveform
leaves the evaluation area.
：Activate editor for setting up
evaluation area.