User Manual

427
────────────────────────────────────────────────────
16.2 Calculating Waveform Data
────────────────────────────────────────────────────
Automatic setting
After calculation, the upper and lower limit is determined from the result, and
the variable display settings are made accordingly.
Depending on the type of calculation, automatically display scale setting may
not be satisfactory. In such a case, use the manual setting procedure.
Manual setting
Use the variable display setting function on the CHANNEL2 screen to set the
upper and lower limit. (See section 9.6.1.)
Calculation result with overflows
The values shown using cursors A and B and the printed values obtained
when the printer recording type is set to "numerical value" are not accurate.
If the display scale is set to "AUTO," the waveform is shown at the top or
bottom of the screen. This indicates that the calculation result has
overflowed.