User Manual

423
────────────────────────────────────────────────────
16.2 Calculating Waveform Data
────────────────────────────────────────────────────
Screen: STATUS4 (MEM
)
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to select the enter.
The setting range is -9.9999E+29 to
+9.9999E+29 (exponent: -29 to +29).
：Enter the constant values.
Selection
Selection
Method
Method
Move the flashing cursor to the desired
item with the CURSOR key, enter the
constant value with the function key, the
JOG control or the CH&NUM key.
Use the function key to select the
TEN-KEY, the CH&NUM key can be
entered numerical value.
For details, refer to Section 9.6.1.
Screen: STATUS4 (MEM
)
Move the flashing cursor to one of the
Z1 - Z16 items.
Press the F2 [ clear eqn ].
Make the setting with the function keys.
：Clear equation
Selection
Selection
Method
Method
：Do not clear equation
Entering the constant values
Deleting an Equation