User Manual

412
────────────────────────────────────────────────────
16.1 Waveform Parameter Calculation
────────────────────────────────────────────────────
Screen: STATUS3 (MEM
)
Press the STATUS key to call up the
STATUS3 screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：Disable printout of parameter
calculation results
：Enable printout of parameter
calculation results
Selection
Selection
Method
Method
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
Selection
Selection
：Storing is disabled.
：Stored on PC card
：Stored on connected SCSI device
：Stored on MO disk
：Stored on floppy disk
：Data can only be transferred to the
9333 LAN COMMUNICATOR when
using a LAN card.
Choose the setting for parameter calculation result printout and saving
・The internal printer can be printed parameter calculation result.
・The parameter calculation results stores a file in the directory currently
selected on the file screen as text data.
For details on saving, refer to Section 14.7.