User Manual

410
────────────────────────────────────────────────────
16.1 Waveform Parameter Calculation
────────────────────────────────────────────────────
OFF
ON
(1) Average
(14) X-Y area
New data
Loading from media
D
isable parameter calculation.
E
nable parameter calculation.
Storing is disabled.
OFF
ON
Enable printout
Disable printout
OFF
FD
PC
SCSI
MO
Stored on floppy disk
Stored on connected SCSI device
Stored on MO disk
Stored on PC card
U
p to four parameter calculations
(No.1 - 4) can be set simultaneously.
CH 1
ALL
Setting the measurement rang
e
OFF
ON
Upper value
Lower value
I
f you want to execute the parameter
evaluation, you have to set this items.
Disable evaluation function
R
eturn NG if result is outside specified
range.
setting the Waveform Parameter Calculation
Parameter calculation setting
s
Setting the waveform parameter evaluatio
n
Setting the Waveform Parameter Calculation
Setting for parameter calculation result
Setting for parameter calculation result saving
Calculation channel settings
Setting the waveform parameter evaluation
setting the Waveform Parameter Calculation
Executing the Waveform Parameter Calculation
Stop recording with GO result
GO
NG
GO&NG
Stop recording with NG result
S
top recording with either GO or NG
result.
SettingStopMode
Waveform parameter calculation Operating Sequence