User Manual

409
────────────────────────────────────────────────────
16.1 Waveform Parameter Calculation
────────────────────────────────────────────────────
16
17
18
19
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
A
Chapter 1
6
Waveform Operatio
n
Functio
n
1
6.1 Waveform Parameter Calculation
・Available for memory recorder function and REC&MEM function.
The Memory waveform for the Record & Memory function is performed with
the Memory recorder function.
・Parameters that were used for captured waveform data and for data after
waveform processing can be determined. The result is shown in numeric form.
・The A/B cursors (vertical, trace) can be used to determine the parameters of a
certain range.
・The following 14 types of calculations are possible:
(1) Average value, (2) RMS value, (3) peak-to-peak value
(4) Maximum value, (5) time to maximum value, (6) minimum value,
(7) time to minimum value, (8) period, (9) frequency, (10) rise time,
(11) fall time, (12) standard deviation, (13) area value, (14) X-Y area value
・The result of waveform parameter calculation is compared to a reference
range, for GO/NG evaluation.