User Manual

407
────────────────────────────────────────────────────
15.2 Using the Multi-Block Function
────────────────────────────────────────────────────
(5) Set the ref block.
Select a memory block whose waveform data
are to be overlaid on screen with the memory
block selected for display. The recording start
time and time axis range are displayed on the
window.
Move the flashing cursor to the ref block
item.
Use the function keys to make the
selection.
：Disable ref block
：Enable ref block
：Turns off all ref block settings.
：Sets all blocks as ref blocks.
Move the flashing cursor to the numerical
value item (ref block).
Ref block settings can be made one block
at a time. Blocks set as ref blocks are
marked with an asterisks.
：Increases in number.
：Decreases in number.
：Enable ref block
：Disable ref block