User Manual

399
────────────────────────────────────────────────────
15.1 Using the Sequential Save Function (MEM)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
：Disable memory segmentation.
：Enable sequential save function.
：Enable multi-block function.
Screen: STATUS
2
Press the STATUS key to call up the
STATUS2 screen.
Move the flashing cursor to the position
shown in the figure on the left.
Press the F2 [SEQUEN].
Selection
Selection
Method
Method
(1) Select the Memory Segmentation
Move the flashing cursor to the shot item,
as shown in the figure on the left.
Use the JOG control or the function keys
to make the selection.
：Move the cursor up in the selection
window.
：Move the cursor down in the
selection window.
Selection
Selection
When the recording length is set to the arbitrary
recording-length mode, recording-length setting
cannot be performed on the memory
segmentation screen.
When the recording length is changed to one
for which memory segmentation is not permitte
d
on the STATUS1 or the DISPLAY screen,
sequential saving is automatically set to OFF.
(2) Setting the Recording Length
Recording
length
（DIV）
Number of channel
REC&MEM
(MEM)
32 c
h
16 c
h
8ch 4ch
25 127 255 255 255 63
50 63 127 255 255 31
100 31 63 127 255 15
200 15 31 63 127 7
500 7 15 31 63 3
1000 3 7 15 31 −
2000 − 3 7 15 −
5000 − − 3 7 −
10000 − − − 3 −
M
aximum number of divisions (16 MW
)
Maximum number of divisions (64 MW
)
Recording
length
（DIV）
Number of channel
REC&MEM
(MEM)
32 c
h
16 c
h
8ch 4ch
25 255 255 255 255 255
50 255 255 255 255 127
100 127 255 255 255 63
200 63 127 255 255 31
500 31 63 127 255 15
1000 15 31 63 127 7
2000 7 15 31 63 3
5000 3 7 15 31 −
10000 − 3 7 15 −
20000 − − 3 7 −
40000 − − − 3 −
■ The recording length and maximum number of divisions are automatically
determined according to the set memory capacity and number of available
channels, as shown in the tables below. See Section 12.2.1 about setting of the
use channel.