User Manual

397

────────────────────────────────────────────────────

Chapter 1

Memory Segmentatio

Functio

・This function divides the memory into separate blocks, each of which can be

used for waveform recording.

・The memory segmentation function has two modes: sequential save and multi-

block.

Sequential save function

・The recording length (DIV) has priority over the number of memory blocks.

・Input signal capture is carried out continuously using the trigger, storing

waveform data successively in each block.

・During recording, no display or printout is carried out.

・This reduces dead time (non-sensitivity periods due to display and printing

delays).

・Data from different blocks can be overlaid on screen for easy comparison. (it

can be printed out)

Multi-block function

・The number of memory blocks has priority over the recording length (DIV).

・Waveform data can be stored in a selected block.

・Data from different blocks can be overlayed on screen for easy comparison. (it

can be printed out)