User Manual

384
────────────────────────────────────────────────────
14.8 LOAD
────────────────────────────────────────────────────
Screen: FILE
Press the FILE key to call up the FILE
screen.
Move the flashing cursor to the (media)
item, shown in the figure on the left.
Use the function keys to make selection.
Method
Method
：Floppy disk media are used.
：PC card media are used.
Selection
Selection
：Select the external storage
connected to the SCSI interface as
the recording medium.
：MO disk media are used.
Use the JOG/SHUTTLE control or
CURSOR key to select the desired file.
To load all the files stored in the batch
save mode at once, select the index file.
Move the flashing cursor to the (command
)
item, shown in the figure on the left.
Use the function keys to select the LOAD.
1
4.8 LOAD
・The unit settings or the measurement data are transferred from the media
to the memory of the unit.
・When loading measurement data, the channel can be specified.
・Measurement data stored by the 8825 can be loaded into the 8826.
Selecting the media to load
Selecting the Command