User Manual

382
────────────────────────────────────────────────────
14.7 SAVE
────────────────────────────────────────────────────
1
4.7.2 Text data store example
"COMMENT","8826 MEM DATA" : Comment character string, Data
type
"DATE","03-28-2001" : Date
"TIME","10:10:00" : Time
"NUM_SIGS", 3 : Number of signals
"INTERVAL", 1.000E-06 : Horizontal axis interval
"HORZ_UNITS", "s" : Horizontal axis unit
"VERT_UNITS", "s", "V", "V" : Vertical axis unit
"SIGNAL","TIME", "ACH 1", "ACH 2" : Signal name
"DATA" : Start of Data
+0.000000000E+00, -5.9375E-03, +9.3750E-04
Any set comment on each channel is shown
.
Any set title comments are shown
.
When comment setting is not OFF, the text data are stored as follows.
Example 1
When the data for analog 4 channles and logic 4 channels is stored in Memory
recorder function (Memory recorder function, memory data in
Recorder&memory function, FFT function)
"COMMENT","8826 MEM DATA"
"DATE","01-01-1999"
"TIME","10:10:00"
"NUM_SIGS", 9
"INTERVAL", 1.000E-06
"HORZ_UNITS", "S"
"VERT_UNITS", "S", "V", "V", "V", "V", "Bit", "Bit", "Bit", "Bit"
"SIGNAL","TIME", "ACH 1", "ACH 2", "ACH 3", "ACH 4", "LCHA1", "LCHA2", "LCHA3",
"LCHA4"
"DATA"
+0.000000E+00, -5.9375E-03, +9.3750E-04, +2.3500E-03, -9.3750E-04, 1,1,1,1
+1.000000E-06, -5.6875E-03, +7.5000E-04, +2.4125E-03, -1.0312E-03, 1,1,1,1
+2.000000E-06, -5.5000E-03, +6.2500E-04, +2.3688E-03, -1.0437E-03, 1,1,1,1
+3.000000E-06, -5.5000E-03, +6.2500E-04, +2.4000E-03, -1.1750E-03, 1,1,1,1
+4.000000E-06, -5.3750E-03, +4.3750E-04, +2.4000E-03, -1.1687E-03, 1,1,1,1
+5.000000E-06, -5.6250E-03, -5.1875E-03, +1.0250E-03, -1.2187E-03, 1,1,1,1
+6.000000E-06, +4.3750E-04, -7.6875E-03, -1.1250E-03, -9.3750E-05, 1,1,1,1
+7.000000E-06, +2.1875E-03, -6.1875E-03, -1.6875E-03, +8.0000E-04, 1,1,1,1
+8.000000E-06, +1.5625E-03, -6.5000E-03, -2.0687E-03, +1.1687E-03, 1,1,1,1
+9.000000E-06, +1.3750E-03, -6.3750E-03, -2.2500E-03, +1.3125E-03, 1,1,1,1
+1.000000E-05, +1.3750E-03, -6.2500E-03, -2.2875E-03, +1.4250E-03, 1,1,1,1