User Manual

381
────────────────────────────────────────────────────
14.7 SAVE
────────────────────────────────────────────────────
NOTE
Auto save Real time save Waveform data, screen data Parameter calculation result
［AUTO .EXT］
［AUTO0001 .EXT］
↓
［AUTO0010 .EXT］
↓
［AUTO0100 .EXT］
↓
［AUTO5000 .EXT］
［REAL .EXT］
［REAL0001 .EXT］
↓
［REAL0010 .EXT］
↓
［REAL0100 .EXT］
↓
［REAL5000 .EXT］
［NONAME .EXT］
［NONAME01 .EXT］
↓
［NONAME10 .EXT］
↓
［NONAM100 .EXT］
↓
［NONA5000 .EXT］
［MEASURE .TXT］
［MEASURE1 .TXT］
↓
［MEASUR10 .TXT］
↓
［MEASU100 .TXT］
↓
［MEAS5000 .TXT］
WAVE (Binary)
SET
MEM REC RMS FFT
STATUS1 screen
STATUS2 screen
STATUS3 screen
STATUS4 screen
○
○*
1
○
×
○
○
○
○
STATUS screen ○ ○ ○ ○
TRIGGER screen ○ ○ ○ ○ ○
CHANNEL 1 screen ○ ○ ○ ○ ○
CHANNEL 2 screen ○ ○ ○ ○ ○
Scaling settings ○ ○ ○ ○ ○
Comment settings ○ ○ ○ ○ ○
SET UP (SYSTEM1) × × × × ○
・When "ALL BLOCKS" is selected, files for all blocks as well as a index file
for reading the data in one operation are created.
・When batch saving with the Recorder & Memory function, a directory with
the same name as the filename is created, and in the directory the
measurement data (with REC, MEM extensions) are created together with
an index file (R_M).
・In the batch saving, partial saving cannot be carried out.
・After the "Yes" function key is selected, the size of the file to be saved is
displayed.
・The directory and the number of files that can be stored in the directory are
limited. For details, see Section 14.7.
・Data stored in the text format is not readable by the 8826.
・Waveforms that are displayed by the recorder function in X-Y format cannot
be saved in text format.
Automatic file name assignment
If the file name is entered as a blank [ . ], it is assigned automatically
according to the following principle.
File contents
The file contents depend on the file type.
○: The data is saved to the file. Settings for the 8826 are always enabled
during reading.
×: The data is not saved to the file.
*
1
：The data is saved to the index file.