User Manual

379
────────────────────────────────────────────────────
14.7 SAVE
────────────────────────────────────────────────────
Extension Meaning Data load by 8826
MEM Memory recorder binary data file YES
REC Recorder binary data file YES
RMS RMS recorder binary data file YES
XYC X-Y CONT recorder binary data file YES
SEQ Sequential save index file YES
MUL Multiblock index file YES
TXT Text data file NO
SET Setting data file YES
ARE Evaluation area YES
BMP Bit map (.bmp) file NO
FFT FFT binary data file YES
R_M REC&MEM index file YES
CMU Setting data files (read-only) for 8910 CAN
ADAPTER
YES
When the store format is set to text data,
spacing can be set. Unit is data number.
Use the function keys or the JOG control
to make selection.
：Move the cursor up in the selection
window.
：Move the cursor down in the
selection window.
Selection
Selection
：determines the data to store.
：Cancel the command to be saved.
NOTE
File name extension
If no file name extension (3 characters after period) is entered, the following
extensions are automatically assigned, according to the stored data type.
Intermittent setting
・Thinning is not applied with FFT data text format storage.
・Recorder XY data cannot be saved as text.
・The size of files that have been saved with data thinning selected are the
same as would be the case if recording length were shortened
proportionately. For example, when the recorded length is 500 DIV and
cropping is 1/5, the file size is the same as a file whose recorded length is
100 DIV with no cropping.