User Manual

378
────────────────────────────────────────────────────
14.7 SAVE
────────────────────────────────────────────────────
Use the CURSOR key to move the flashing
cursor to the (channel) item, shown in the
figure on the left.
Use the function keys or the JOG control
to select the channel.
Selection
Selection
：Store data for all displayed
channels (displayed data only).
：Store waveform data for channel 1.
：Store waveform data for channel 32
.
：Store logic waveform data (all data)
.
ALL
CH1
CH32
LOGIC
：determines the data to store.
：Cancel the command to be saved.
Use the CURSOR key to move the flashing
cursor to the (channel) item, shown in the
figure on the left.
Use the function keys to select the
F1 [ INPUT ].
For character entry procedure, see Section
9.8.4.
・ Do not use the characters and symbols
below in a file name. A file containing any
of these characters/symbols in its file nam
e
cannot be processed under Windows 2000
or XP. Half-size symbols: +, =, [,]
Selecting the channel for storing data
Entering the file name