User Manual

371
────────────────────────────────────────────────────
14.4 SCSI Interface
────────────────────────────────────────────────────
640 MB
I・O DATA MOF-RM640
MOF-SM640
LOGITEC LMO-A636S
FUJITSU FMO-640W3
FMO-640WL3
1
4.4.3 Setting the SCSI Number
Screen: INTERFACE (SYSTEM4
)
Press the SYSTEM key to call up the
SYSTEM4 screen.
Move the flashing cursor to the desired
item.
Use the function keys or jog control to
make the setting.
：Value up
：Value down
Selection
Selection
Method
Method
NOTE
■ The following MO drives have been used satisfactorily by HIOKI.
(As of April, 2001)
Note that the MO may not be compatible should the MO drive specifications
be changed, even if the model No. remains the same.
■ SCSI ID
Set the ID number of the 8826 on the SCSI bus.
The available value range is 0 to 7.
■ Target ID
Set the ID number of the MO drive, which will be connected to the 8826, on
the SCSI bus. The ID number of the internal MO drive (optional) is set to 4.
Therefore, if the internal MO drive has been mounted, the ID number 4
cannot be specified. The available value range is 0 to 7.
・Do not set the SCSI ID and the target ID to the same number.
・When "SCSI" or "MO" is selected as the output destination, separate
destinations cannot be set for the auto save, parameter calculation result
save, and the COPY key output.