User Manual

366
────────────────────────────────────────────────────
14.2 MO Disk (Option)
────────────────────────────────────────────────────
1
4.2.1 Setting the MO Drive
Screen: INTERFACE (SYSTEM4
)
Press the SYSTEM key to call up the
SYSTEM4 screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：The MO drive is not treated as a
drive in the PC.
：The MO drive is treated as a drive
in the PC.
Selection
Selection
Method
Method
NOTE
The internal MO drive can be treated as an MO drive in the PC. This can be
selected only when the optional 9607 MO Unit is installed.
・The ID of the internal MO is fixed at 4.
・When the internal MO setting is enabled (ON), the internal MO media
selection cannot be selected.
・When the internal MO setting is enabled (ON) and the storage destination
for automatic storage is set to Internal MO, automatic storage setup is
disabled.