User Manual

365
────────────────────────────────────────────────────
14.2 MO Disk (Option)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAUTIO
N
・Avoid operation at above 35℃ as far as possible. (If operated at above 35℃
,
the disk protection function is activated, and it is not possible to save or read
data.)
・If a MO disk is inserted upside down, backwards, or in the wrong direction,
the MO disk or the unit may suffer damage. Before shipping the unit, always
remove the MO disk.
・Do not remove the MO disk while the MO disk unit is operating (the LED on
the MO disk unit is on).
・The number of bytes depends on the MO disk format.
・If the write-protect tab on the MO disk is in the set position, the operations
can not be performed.
・The MO disk must be initialized (formatted) before using it.
・The MO drive may not operate properly when the unit is placed front side up
.
Back side of dis
k
Write protect
Write enable
MO disk Slot
Eject button
Manual eject hole
NOTE
1
4.2 MO Disk (Option)
■ MO type
Use 3.5-inch MO disks (128, 230, 540, 640 MB: rewritable and overwrite) with
this unit.
■ Write protection
■ Inserting/Removing the MO disk
With the label side up, note the direction of the disk, and insert it all the way
in. To remove the MO disk, press the eject button.
If for any reason it should be impossible to remove the disk, use the following
procedure.
During powering on, press continuously the eject button of the MO drive to
eject the disk.
Power off the unit and insert a pin of diameter approximately 1 mm into
the manual eject hole of the MO drive, to eject the disk.