User Manual

364
────────────────────────────────────────────────────
14.1 Floppy Disk
────────────────────────────────────────────────────
CAUTIO
N
・If a floppy disk is inserted upside down, backwards, or in the wrong direction
,
the floppy disk or the unit may suffer damage. Before shipping the unit,
always remove the floppy disk.
・2DD floppy disks formatted in PC9801 640 K-byte format cannot be used.
・Do not remove the floppy disk while the floppy disk unit is operating (the LED
on the floppy disk unit is on).
・The number of bytes depends on the floppy disk format.
・If the write-protect tab on the floppy disk is in the set position, the operations
can not be performed.
・The floppy disk must be initialized (formatted) before using it.
Write-protect
set position
Write-protect
unset positio
n
Floppy disk slot
Eject button
1
4.1 Floppy Disk
3.5 inch 2HD or 2DD floppy disks can be used.
The following floppy disk formats can be used:
720 KB (IBM PC/AT compatible), 1.2 MB (NEC PC-9801 series), 1.44 MB
(IBM PC/AT compatible or NEC PC-9801 series with 3-mode drive)
■ Write protection
■
How to set a floppy disk:
With the label side up, note the direction of the disk, and insert it all the way
in.
To remove the floppy disk, press the eject button.