User Manual

361
────────────────────────────────────────────────────
13.7 External Printer (Color Print)
────────────────────────────────────────────────────
・Connect the printer card to the unit.
See Section 14.3.1.
Connecting the PRINTER CARD
・Set the output destination by PRINT key and
COPY key to external printer.
Output destination
・For details on settings, refer to Section 13.4.4.
Output color
・Select the color of the output.
Printer driver
・Set the control code ("ESC/P" or "ESC/P Raster")
according to the printer to be used.
・Save "newly measured data" or "data saved to
the media" in the internal memory of the unit.
For details on load, see Section 14.8.
・Press the DISP key; the display screen will
appear. Using cursors A and B, the print range
can be specified.
For information on how to use cursors A and B,
see Section 11.2.
・When the PRINT key is pressed, the waveform
data is printed out at a rate of 25 divisions.
PRINT key
COPY key
・When the COPY key is pressed, the data shown
on the LCD is printed out.
・Turn on the external printer.
・Load A4-size sheets and prepare the printer for
printing.
Setting the Ext.Printer
Setting the Interface
Saving the data in the memory
Specifying the printout range
Printing starts
NOTE
1
3.7 External Printer (Color Print)
Using the 9559 PRINTER CARD, waveform data can be output on A4-size
sheets from the external printer in color or monochrome.
PRINT key: Prints out equivalent to 25 divisions waveform data or numerical
data.
COPY key: Prints out the screen hard copy.
With respect to the following items, the external printer differs from the
internal printer:
(1) For the list and gauge functions, the list is printed out but the gauge is not
output. If the display format is the X-Y screen, however, the gauge is also
printed out.
(2) The upper and lower limits are printed out for every page.
(3) When both the upper-lower print function and 0 position comment
function are enabled, the upper-lower print function is performed first.