User Manual

360
────────────────────────────────────────────────────
13.6 Printing Procedure
────────────────────────────────────────────────────
1
3.6.6 List Print
Screen: Excluding DISPLAY
While the setting screen (excluding
DISPLAY) is displayed, press the PRINT
key.
Method
Method
NOTE
1
3.6.7 Report Print
Screen: DISPLAY
Press the DISP key to call up the
DISPLAY screen.
Press the FEED key and COPY key
simultaneously.
(Press and hold the FEED key and then
press the COPY key.)
Method
Method
NOTE
The settings for the various functions made with the STATUS screen,
CHANNEL screen etc. can be printed out in list format.
The list to be printed contains the setup conditions for the acquired
waveforms. Even if the settings are changed following wave acquisition, the
contents of the list remain unchanged.
・This function prints the waveform range shown on the display, upper-lower
limits, analog channel along with the active settings.
・If the A and B cursors are displayed on the screen, they are also printed.
・When "COMMENT" or "SET & COMMENT" is set, the comments are also
printed (See Section 9.8).
In the FFT function, report print cannot be carried out .