User Manual

342
────────────────────────────────────────────────────
13.4 Setting the SYSTEM Screen (printout)
────────────────────────────────────────────────────
1
3.4.1 SET UP Screen (SYSTEM 1)
Screen: SET UP (SYSTEM1
)
Press the SYSTEM key to call up the
SYSTEM1 screen.
Move the flashing cursor, want to set the
item.
Use the function keys to make the
selection.
Method
Method
Selection
Selection
NOTE
：Channel numbers will not be printed for the
waveform on the recording paper.
：Channel numbers will be printed for the waveform on
the recording paper.
Selection
Selection
：Comments will be printed for the waveform on the
recording paper.
1
3.4 Setting the SYSTEM Screen (printout)
Grid Type
・Selects the type of grid shown on the display screen and drawn on the
recording paper.
・On the waveform display screen, the standard and fine grids are defined as
the standard, and the standard (dark) and fine (dark) grids are defined as the
standard (dark) grids.
・"Time" and "Time (dark)" can be set only during printing.
In printing in the X-Y screen format, the standard time axis and the standard
time axis (dark) are applied.
Channel Marker
The channel numbers or the comments are printed together with the
waveform on the recording paper.
Comments can be set on SYSTEM3 (COMMENT) screen.