User Manual

341
────────────────────────────────────────────────────
13.3 Setting the CHANNEL Screen (printout)
────────────────────────────────────────────────────
Screen: CHANNEL1, DISPLAY
Press the CHAN key to call up the
CHANNEL1 screen.
Move the flashing cursor to desired
channel, and use the function keys to set
the waveform color (including displays
waveform ON/OFF).
Method
Method
Specify the X-axis channel.
Move the cursor to the channel to be used
as X axis. And use the function keys or
the JOG control to select X axis.
Specify the Y-axis channel.
This is done in the same way as in step
.
For graph 2 to graph 4, the settings are
made in an identical.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
：Waveform display is enabled.
：Waveform display is disabled.
Set which graph type to use when display format has been set to X-Y screen
display on the STATUS screen. (MEM and REC only)