User Manual

340
────────────────────────────────────────────────────
13.3 Setting the CHANNEL Screen (printout)
────────────────────────────────────────────────────
1
3.3.2 Setting the Waveform Display Graph Position
Screen: CHANNEL1, DISPLAY
Press the CHAN key to call up the
CHANNEL1 screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：Display the waveform on graph 1.
：Display the waveform on graph 2.
Selection
Selection
Method
Method
：Display the waveform on graph 3.
：Display the waveform on graph 4.
Flashing curso
r
Set which graph type to use when display format has been set to DUAL,
QUAD, OCT or HEX screen display on the STATUS screen.