User Manual

339
────────────────────────────────────────────────────
13.3 Setting the CHANNEL Screen (printout)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
3.3.1 Setting the Print Density
Screen: CHANNEL
1
Press the CHAN key to call up the
CHANNEL1 screen.
Move the flashing cursor to the item, as
shown in the figure on the left
Use the function keys to select the [density]
.
：Select the print density.
Selection
Selection
Method
Method
：Return to CHANNEL screen.
Use the function keys or JOG control to
select the print density.
For CH2 to 32, the settings are made in an
identical.
Flashing curso
r
NOTE
1
3.3 Setting the CHANNEL Screen (printout)
When data is to be output from the internal printer, the print density (four
types) can be set for the waveform color (12 colors). After the desired density
is set, the waveform density is changed for the printout or hard-copy run.
・After the system is reset, the print density returns to the previously set
value.
・When the analog channel comment is set to "Setting" or "Setting &
Comment," printouts are provided in the print display color (
) of the
analog channel.