User Manual

335
────────────────────────────────────────────────────
13.1 Printout of Measurement Data Operating Procedure
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
システム設定を行いま
SYSTEM screen
Grid Type
Channel Marker
Time Value
List & Gauge
SYSTEM3
COMMENT
SYSTEM2
SCALING
SYSTEM4
INTERFACE
Printer Density
測定データの処理
Printing Procedure
・This mode serves to print waveform data from the
internal memory.
・Printout is carried out automatically after a waveform
has been captured for the specified recording
length. (MEM, FFT)
・The input waveform and data are printed out
continuously in real time. (REC, RMS, REC&MEM)
・This function prints the waveform between the A
and B cursors (vertical or trace cursors).
・The display contents of the all screens can be
printed out as is.
・The settings for the various functions made with the
STATUS screen, CHANNEL screen etc. can be
printed out in list format.
・This function prints the waveform range shown on
the display, upper-lower value, analog channel alon
g
with the active settings.
Manual Print
Auto Print
Real-Time Print
Partial Print
Screen Hard Copy
List Print
Report Print
SYSTEM1
SET UP
Upper-lower print
0 position Comment
Counter Print
Output Destination by the COPY key
Output Destination by the PRINT key
・Using the 9559 PRINTER CARD, waveform data
can be output on A4-size sheets from the external
printer in color or monochrome.
External Printer
See Section 13.4.1.
See Section 13.4.2.
See Section 13.4.3.
See Section 13.4.4.
See Section 13.6.1.
See Section 13.6.2.
See Section 13.6.3.
See Section 13.6.4.
See Section 13.6.5.
See Section 13.6.6.
See Section 13.6.7.
See Section 13.7.