User Manual

334
────────────────────────────────────────────────────
13.1 Printout of Measurement Data Operating Procedure
────────────────────────────────────────────────────
測定データの処理
STATUS screen
SINGLE
QUAD
DUAL
OCT
HEX
X-Y SINGLE
X-Y QUAD
・Display and record as one graph.
(At the most, 32 analog + 32 logic signals)
・Display and record as two graphs. (At the most, 32
analog + 16 logic signals)
・Display and record as four graphs.
(At the most, 32 analog + 8 logic signals)
・Record as eight graphs.
(At the most, 4 analog + 4 logic signals)
・Record as sixteen graphs.
(At the most, 2 analog + 2 logic signals)
Waveform
Numerical value
Smooth print
・The smooth print function can be used, but print speed
will decrease.
Interval
・The data spacing interval also must be set.
Print mode
測定データの処理
CHANNEL screen
Print density
Display graph position
・The density of the waveform data printing can be set.
・The position of waveform data print can be set when the display
format has been set to screen display excluding Single screen.
Format
(MEM, REC only)
(MEM, REC only)
See Section 13.2.2.
See Section 13.2.1.
See Section 13.3.1.
See Section 13.3.2.
1
3.1 Printout of Measurement Data Operating Procedur
e