User Manual

331
────────────────────────────────────────────────────
12.7 SELF CHECK
────────────────────────────────────────────────────
1
2.7.3 DISPLAY CHECK
Move the flashing cursor to the 3: DISPLAY CHECK item.
Press the F1 [ exec ] to check the display.
Press any key to move to the next check.
When the test is completed, press any key to return to the self-test
setting screen.
Method
Method
1
2.7.4 KEY CHECK
Move the flashing cursor to the 4: KEY CHECK item.
Press the F1 [ exec ] to start the test.
Press any key on the front panel, and the corresponding field on the
display changes to reverse. Turn the JOG and the SHUTTLE controls a
t
least one turn fully clockwise and counterclockwise and press each of the
keys at least once, and the test is completed.
Method
Method
NOTE
・This test checks the display.
・Two check patterns (solid-color display check and gradation check) are
available.
This test checks the key operation.
・If any key is defective, the key test cannot be completed normally.
・In this case, press the START key and the STOP key together to return to the
self-test setting screen.
・The START key, Select key and number display also serve for testing the
LED function.