User Manual

329
────────────────────────────────────────────────────
12.6 INITIALIZE Screen
────────────────────────────────────────────────────
1
2.6.2 WAVE DATA CLEAR (DATA INITIALIZE)
Move the flashing cursor to 2: WAVE DATA CLEAR, and make the setting.
Press the F1 [ exec ].
Method
Method
1
2.6.3 SYSTEM RESET
Move the flashing cursor to the 3: SYSTEM RESET item, and make the
setting.
Press the F1 [ exec ].
・ To return all settings including communications settings to the original
factory settings, turn on power while holding down both the
START key
and
STOP key
Method
Method
1
2.6.4 System Information
Screen: INITIALIZE (SYSTEM5
)
Press the SYSTEM key to call up the
SYSTEM5 screen.
Move the flashing cursor to the 4:SYSTEM
CONDITION item.
Press the F1 [ exec ].
Pressing a key returns to the initial
setting screen.
Method
Method
Clears and initializes waveform data stored in memory.
・Resets all settings, which except for communications settings (GP-IB, RS-
232C, SCSI, LAN), to the factory default values.
・The same effect can be achieved by turning power to the unit on while
holding down the STOP key.
Displays the configuration of installed options and the software version.