User Manual

328
────────────────────────────────────────────────────
12.6 INITIALIZE Screen
────────────────────────────────────────────────────
Screen: INITIALIZE (SYSTEM5
)
Press the SYSTEM key to call up the
SYSTEM5 screen.
Move the flashing cursor, want to set the
item.
Use the function keys to make the
selection.
Method
Method
1
2.6.1 TIME SET (Setting the Clock)
Move the flashing cursor to the year, month, day, hour, minute items o
f
1: TIME SET, and use the JOG control or the function keys to make the
settings.
Press the F5 [ SET ] to start the clock. Seconds are reset to 00.
For correcting errors of less than 1 minute.
Press the
F4 [ 30 s adjustment ] to make the setting.
When 30 s adjustment is pressed, the seconds are handled as follows.
00 to 29 seconds: Minutes are unchanged and seconds are reset to 00.
30 to 59 seconds: Minutes are advanced by 1 and seconds are reset to 00.
Method
Method
1
2.6 INITIALIZE Screen
Setting the clock (TIME SET), clearing waveform data (DATA INITIALIZE),
and initialization of setting items (SYSTEM RESET) are available.
・This unit incorporates a calendar with automatic leap year compensation
and 24-hour clock.
・The clock is used for the following functions:
・Display of year/month/day/hour/minutes/seconds on all screens
・Timer trigger function
・Trigger time list printout