User Manual

324
────────────────────────────────────────────────────
12.5 INTERFACE Screen (SYSTEM 4)
────────────────────────────────────────────────────
NOTE
■ Compatible LAN Card
The LAN cards below are compatible with the 8826. (As of April 2003)
HIOKI 9578 10BASE-T LAN CARD
*1
NETGEAR, Inc. FA411
For the latest information, visit the HIOKI website.
*1 Sales of the HIOKI 9578 10BASE-T LAN CARD have been discontinued.
Please use the commercially available LAN cards recommended by HIOKI.
■ Setting
This section describes the setting procedure.
Set up the 8826 and connect the cable in the sequence below.
1. Insert a LAN card.
2. Set up the LAN parameters in "SYSTEM 4." (Do not connect the cable yet.)
For details, see "Setting Individual Parameters" below.
3. After setting all the parameters, press
F5 [Enter].
4. Connect the LAN cable to the 8826 and the network.
Be sure to make the settings above before connecting the 8826 to the network.
Note that making these settings with the 8826 connected to the network may
result in illegal information being sent to the network-for example, if the same
IP address as that of another device on the network is selected.
Preparations for Setting Parameters
When connecting to an existing network, the following parameters must be set
up. Ask the administrator (department) of the network system to assign the
following in advance:
・DHCP: Used/not used
・Host name and address of the 8826
Host name (up to 12 characters):
IP address : . . .
Subnet mask : . . .
(When using DHCP, the IP address and subnet mask are not needed.)
・DNS setting
DNS: Used/not used
IP address (when using DNS):
. . .
(The setting that can be obtained from DHCP has priority.)
・Gateway
Gateway: Used/not used
IP address (when using gateway): . . .
(The setting that can be obtained from DHCP has priority.)
・TCP/IP Port No.:
X (default: 880X)
(Specify the three leftmost digits of the four digits. Numbers 0 to 9 in the least
significant digit are used by the 8826 or reserved. Specify the port No. when
default numbers 8800 to 8809 are not available.)