User Manual

319
────────────────────────────────────────────────────
12.5 INTERFACE Screen (SYSTEM 4)
────────────────────────────────────────────────────
Screen: INTERFACE (SYSTEM4
)
Press the SYSTEM key to call up the
SYSTEM4 screen.
Move the flashing cursor, want to set the
item.
Use the function keys to make the
selection.
Method
Method
You can edit the 8910 CAN ADAPTER setting
when the 8910 CAN ADAPTER is connected vi
a
the RS-232C interface.
Press the <CH.SET> key to switch between the
interface and 8910 setting screens.
For details, refer to the instruction manual
provided with the 8910 CAN ADAPTER.
■ Setting the 8910 CAN ADAPTER
1
2.5.1 Output Destination by the COPY key
：Output to internal printer
：Output to external printer
Selection
Selection
：Output to floppy disk (BMP format)
：Output to PC card (BMP format)
：Output using the interface (BMP format)
：Output to connected SCSI interface. (BMP format)
：Output to MO drive. (BMP format)
：Uses ESC/P as the control code
：Uses ESC/P raster as the control code
Selection
Selection
1
2.5 INTERFACE Screen (SYSTEM 4)
The screen data output destination when the COPY key is pressed is specified.
When the external printer is the output destination, select the control code.