User Manual

315
────────────────────────────────────────────────────
12.2 SET UP Screen (SYSTEM 1)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2.2.7 Grid Type
Selection
Selection
NOTE
1
2.2.8 Channel Marker
：Channel numbers will not be printed for the
waveform on the recording paper.
：Channel numbers will be printed for the waveform on
the recording paper.
Selection
Selection
：Comments will be printed for the waveform on the
recording paper.
1
2.2.9 Time Value
：Displays the time from the trigger point (unit: fixed).
：Displays the time from the trigger point (unit: base 60).
Selection
Selection
：Displays the number of DIV from trigger point.
：Displays the time when a waveform is captured.
・Selects the type of grid shown on the display screen and drawn on the
recording paper.
・On the waveform display screen, the standard and fine grids are defined as
the standard, and the standard (dark) and fine (dark) grids are defined as the
standard (dark) grids.
・"Time" and "Time (dark)" can be set only during printing.
In printing in the X-Y screen format or FFT function, the standard time axis
and the standard time axis (dark) are applied.
The channel numbers or the comments are printed together with the
waveform on the recording paper.
The time from the trigger point and other information can be printed.