User Manual

314
────────────────────────────────────────────────────
12.2 SET UP Screen (SYSTEM 1)
────────────────────────────────────────────────────
：value up
：value down
Selection
Selection
： Exit from the custom setting screen
1
2.2.5 Beep Sound
：The beep sounds with error messages (error or
warning display) and when a waveform is evaluated
as NG.
：Beep is not heard.
Selection
Selection
：The beep sounds upon start, trigger, stop and when
data storage finished, as well as with error messages
(error or warning display) and when a waveform is
evaluated NG.
1
2.2.6 Language
：The display language is Japanese.
：The display language is English.
Selection
Selection
■ Custom setting (setting the color as desired)
Change the R.G.B. setting values of each item on the screen.
Move the flashing cursor to the item for which you want to change the setting
values, and use the JOG control or the function keys to make the settings.
The setting values inside the window applies to the colors of the particular
window. When a value is changed, the color of the area corresponding to this
item changes.
When system reset is executed, set colors are initialized and become the same
color as that of display color 1.
This function indicates the operating status by a beep sound. The beep can be
selected from two types. Performing a system reset sets the ON1 beep type.
Serves to set the display language.