User Manual

312
────────────────────────────────────────────────────
12.2 SET UP Screen (SYSTEM 1)
────────────────────────────────────────────────────
Screen: SET UP (SYSTEM1
)
Press the SYSTEM key to call up the
SYSTEM1 screen.
Move the flashing cursor, want to set the
item.
Use the function keys to make the
selection.
The item of channel marker, time value
display, upper and lower limits of printer,
zero position comment, counter printing
cannot be used in FFT function.
Method
Method
1
2.2.1 Use Channel ( MEM only)
：Allocates the memory for measurement data to
channels 4. Measurement cannot be made on channel
s
5 to 32 and logic CHE to CHH.
：Allocates the memory for measurement data to
channels 8. Measurement cannot be made on channel
s
9 to 32.
：Allocates the memory for measurement data to
channels 16. Measurement cannot be made on
channels 17 to 32.
：Allocates the memory for measurement data to
channels 32.
Selection
Selection
NOTE
1
2.2 SET UP Screen (SYSTEM 1)
・Select whether the memory for measurement data is used by being divided up.
・The smaller the number of channels in use, the longer will be settable
recording length.
Settings for the use channel are displayed only when the "Memory Recorder"
function has been set.