User Manual

304
────────────────────────────────────────────────────
11.4 Zoom Function
────────────────────────────────────────────────────
：Time axis direction magnification u
p
：Time axis direction magnification
down
To terminates the zoom function, press the
function key [close].
Screen: DISPLAY
Method
Method
Press the DISP key to call up the
DISPLAY screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to select the [ zoom ]
.
When the zoom function is selected, the
display is split into two horizontally tiled
screens.The waveform before the zoom
mode was activated is displayed on the
upper screen (standard screen). The lower
screen shows the zoomed waveform (zoom
screen).
Move the flashing cursor to the zoom
position shown in the figure on the left.
Use the JOG control or the function keys
to set the magnification ratio.
The lower screen’s display magnification is
always larger than the upper screen’s
display magnification.
〔〕brackets on the upper screen indicate
the waveform range displayed on the lowe
r
screen.
Selection
Selection
1
1.4 Zoom Function
This function divides the memory recorder function display screen into upper
and lower windows, so that the regular-size waveform is displayed in the
upper window and the waveform enlarged in the time axis direction is
displayed in the lower window.