User Manual

303

────────────────────────────────────────────────────

11.3 The Magnification/Compression Ratio Along the Time Axis

────────────────────────────────────────────────────

×1/

Screen: DISPLAY, CHANNE

Move the flashing cursor to the position

shown in the figure on the left.

Use the function keys or the JOG control

to select the magnification/compression

ratio.

：Ratio up

：Ratio down

Selection

Method

Function Magnification/Compression ratio

MEM

REC&MEM

×10, ×5, ×2, ×1, ×1/2, ×1/5, ×1/10, ×1/20, ×1/50, ×1/100, ×1/200

1/500, ×1/1000, ×1/2000, ×1/5000, ×1/10000

REC, RMS

REC&MEM

×1, ×1/2, ×1/5, ×1/10, ×1/20, ×1/50, ×1/100, ×1/200, ×1/500

NOTE

1.3 The Magnification/Compression Ratio Along the Time Ax

・The magnification/compression ratio along the time axis can be set. (MEM

and REC&MEM)

・By magnifying the waveform, detailed observations can be made. By

compressing the waveform, an entire change can be promptly apprehended.

・Magnification/compression of the screen uses the left edge as reference,

regardless of the status of the A/B cursor.

・The magnification/compression factor can be changed also after

measurement is completed.

The magnification or compression ratio along the voltage axis is set on the

Channel or Waveform Display screen. Refer to Section 9.3.5 for details.