User Manual

298
────────────────────────────────────────────────────
11.2 Using the A/B Cursors
────────────────────────────────────────────────────
1
1.2.2 Using the Line Cursors (Horizontal)
Screen: DISPLAY
Move the flashing cursor to the csr item.
Use the function keys to select the "Line
cursor (horizontal: v)".
：Disable A/B cursors
：Line cursor (vertical: t, 1/t)
Selection
Selection
Method
Method
：Line cursor (horizontal: v)
：Trace cursor (the point where the
cursor crosses the waveform)
Use the function keys to select the cursor
to be moved.
：Use A cursor only
：Move the A cursor only
Selection
Selection
：Move the B cursor only
：Move both the A and B cursors
The channel setup menu appears below
the cursor. Using the function keys or the
JOG control, move the flashing cursor to
set the channel of the waveform for which
the voltage is to be read. This channel
setting must be performed for both cursors
A and B.
Press the A･B CSR SELECT key so that
the A.B CSR LED lights up.
Rotate the JOG/SHUTTLE control to move
the cursor.
Used to read a voltage value of the specified channel. A/B cursor can be
specified a different channel.