User Manual

293
────────────────────────────────────────────────────
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
・To set a numerical value using the JOG control on
the display screen, press the VALUE select key.
（
The selection window is not displayed.)
Line cursor (vertical)
Line cursor (horizonta
l)
Trace cursor
・To scroll the waveform on the display screen, press
the WAVE select key.
Use the JOG/SHUTTLE control to scroll the
waveform.
・When want to use the A/B Cursors, press the A･B
CSR select key.
・Pressing the CH.SET key, enables the
measurement conditions for each channel on the
display screen to be set or changed.
・MEM, REC&MEM：magnification and compression
REC, RMS, REC&MEM
：
compression only
・Press the LEVEL MON. key on the DISPLAY
screen, waveform input level can be monitored.
・Shows the position of the currently displayed
waveform within the entire recording length (MEM
and REC).
・
Shows the memory segmentation status (MEM).
Scrolling the Waveform
Setting the Input channel
Setting the Input channel
Scrolling the Waveform
Using the A/B Cursors
Using the A/B Cursors
The magnification/compression
ratio along the time axis
The magnification/compression
ratio along the time axis
Input Level Monitor Functio
n
Using the A/B Cursors
View function
Input Level Monitor Functio
n
Zoom function
Zoom function
・This function divides the memory recorder function
display screen into upper and lower windows, so
that the regular-size waveform is displayed in the
upper window and the waveform enlarged in the
time axis direction is displayed in the lower window.
See Section 9.9.
See Section 11.1.
See Section 11.2.
See Section 11.3.
See Section 11.4.
See Section 11.5.
See Section 11.6.
Chapter 1
1
Display Screen Operatio
n
Indicates the DISPLAY screen operation.