User Manual

5
────────────────────────────────────────────────────
1.2 Names and Function of Parts
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
10
HELP key
･ Provides on-line help.
11
VALUE key
･ Uses to set numerical values
12
WAVE key
･ Uses to scroll the waveform.
13
A･BCSRkey
･ Uses to move the A/B cursor.
14
JOG
･ Rotary control knob that serves to change values, move the A/B
cursors, and scroll the waveform.
15
SHUTTLE
･ Concentric ring that serves to move the A/B cursors, and to
scroll the waveform. The speed of movement is proportional to
the rotation angle.
16
CH&NUM key
･ Sets channels or inputs numerical values
17
Number displa
y
･ Indicates the channel set using the CH&NUM keys.
18
POSITION key
･ Determines the zero position for the channel set using the
CH&NUM keys.
19
RANGE key
･ Determines the measurement range for the channel set using
the CH&NUM keys.
20
AUTO key
･ Pressing this key activates automatic setting of X and Y axis
range values for easy reading.
21
TIME/DIV key
･ Serves to set the speed for inputting and storing the input
signal.
22
STOP key
･ Stops measurement and analysis.
･ When STOP key pressed twice, measurement is stopped.
23
START key
･ Initiates the measurement and analysis. During measurement,
the LED above the key is lit.
24
CURSOR key
･ These keys serve to move the flashing cursor in the four
directions.
25
MANU TRIG key
･ Serves to cause manual triggering.
26
CH.SET key
･ Sets the input channel on the display screen
･ Toggles the screen among those for analog channels (1 to 16),
analog channels (17 to 32), and logic channels (A to H).
27
LEVEL MON. key
･ Serves to check the input signal level.
28
VIEW key
･ Serves to indicate the position of the currently displayed screen
information in relation to the entire recording length.
･ Call up information about the status of memory block.
29
（F1∼F5）key
･ Serve to select setting items.
30
FD slot
･ Insert an floppy disk.
31
MO disk slot
･ Insert an MO disk. (If the 9598 MO UNIT is not equipped, a
blank panel is equipped instead.)
32
AC POWER
switch
･ Serves to turn the unit on and off.
33
LCD display