User Manual

280
────────────────────────────────────────────────────
10.8 Analog Trigger
────────────────────────────────────────────────────
Move the flashing cursor to the position
shown in the figure.
Use the function keys to select the trigger
direction (slope).
：Enables triggering on the rising
period.
：Enables triggering on the falling
period.
Selection
Selection
Move the flashing cursor to the position
shown in the figure.
Use the JOG control or the function keys
to make the setting.
：Value up, large step
：Value up, small step
：Value down, small step
：Value down, large step
Selection
Selection
(3) Select the trigger direction (slope).
(4) Set the reference voltage value.
Setting Item Setting Method
Trigger mode Function key
Trigger type Function key
Channel Function key, Jog (VALUE select key)
Upper level Function key, Jog (VALUE select key)
Lower slope Function key, Jog (VALUE select key)
Pre-trigger Function key, Jog (VALUE select key)
Restriction：The trigger slope and reference voltage cannot be
set.
The selected window is not displayed in the pre-
trigger setting.
Settings on the DISPLAY screen