User Manual

273
────────────────────────────────────────────────────
10.8 Analog Trigger
────────────────────────────────────────────────────
Screen: TRIGGER, DISPLAY
Call up the TRIGGER or DISPLAY screen
.
Move the flashing cursor to the position
shown in the figure.
Use the function keys to select LEVEL.
Method
Method
Move the flashing cursor to the position
shown in the figure on the left.
Use the JOG control or the function keys
to make the selection.
：Value up, large step
：Value up, small step
Selection
Selection
：Value down, small step
：Value down, large step
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：Enables triggering on the rising
edge.
：Enables triggering on the falling
edge.
Selection
Selection
(1) Select the level trigger
(2) Set the trigger level.
(3) Select the trigger direction (slope).