User Manual

267
────────────────────────────────────────────────────
10.5 Pre-trigger
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE
・When the pre-trigger is set, the trigger will not be registered for a certain
period after the start of measurement. (During this interval, Pre-trigger
standby is shown on the display.)
・When the trigger can be registered, the indication Waiting for trigger is shown
on the display.
・In the memory recorder function and FFT function, pre-trigger cannot be
set, when the time axis range sets "EXT.".
・A stored Recorder & Memory waveform can be triggered simultaneously
with the start of the Recorder waveform, in which case the preset trigger
level for recording is ignored.
・When Real-Time Save is enabled for Recorder and Memory, trigger settings
for the Memory waveform are ignored (free-run operation).