User Manual

255
────────────────────────────────────────────────────
9.14 Setting the 8947 CHARGE UNIT
────────────────────────────────────────────────────
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make selection.
Selection
Selection
Flashing curso
r
(2) Setting the sensor sensitivity
：Value up, large step
：Value up, small step
：Value down, small step
：Value down, large step
Set the sensor sensitivity. Sensor sensitivity is the
value of the acceleration sensor. The measurement
range varies according to sensor sensitivity. Set the
sensor sensitivity before you set the measurement
range. Refer to Section 9.14.2.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make selection.
Selection
Selection
Flashing curso
r
(3) Setting the measurement range
：Value up, large step
：Value up, small step
：Value down, small step
：Value down, large step
The measurement range varies according to sensor
sensitivity. Set the sensor sensitivity before you set
the measurement range.