User Manual

245
────────────────────────────────────────────────────
9.13 Setting the 8940 F/V UNIT
────────────────────────────────────────────────────
9
.13.2 Setting the Count Mode
Screen: CHANNEL1, DISPLAY
Call up the CHANNEL1 or DISPLAY
screen.
Use the CH.SET key to display the desired
channel screen.
Use the CURSOR key to move the flashing
cursor to the graph position.
Use the function keys or the JOG control
to set the COUNT.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
Method
Method
Flashing curso
r
(1) Setting the measurement mode
Flashing curso
r
(2) Setting the measurement range
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys, the JOG control or
the RANGE key to make the selection.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
For count mode, the unit of measurement is ’c’ (counts).