User Manual

244
────────────────────────────────────────────────────
9.13 Setting the 8940 F/V UNIT
────────────────────────────────────────────────────
【 When Hold is OFF (10 ms)】
A
t frequencies of less than 100 Hz
,
the signal is halved.
【 When Hold is OFF (1 s)】
A
t frequencies of less than 1 Hz,
the signal is halved.
0
0
100 Hz
1Hz
200 Hz
2Hz
【 When Hold is ON】
T
he initial value is held (the signal
is
n
ot halved), so the result is as
shown in the diagram below.
【 Actual Event 】
F
requency drops to 0Hz from a
c
ertain frequency, then increases
from that point
(2) The following are differences depending on whether Hold is ON or OFF when
the frequency drops to 0 Hz from a certain frequency, then increases from that
point.