User Manual

234
────────────────────────────────────────────────────
9.10 Setting the 8937 VOLTAGE/TEMP UNIT
────────────────────────────────────────────────────
9
.10.2 Making the Settings of Temperature Measurement
Screen: CHANNEL1, DISPLAY
Call up the CHANNEL1 or DISPLAY
screen.
Use the CH.SET key to display the desired
channel screen.
Use the CURSOR key to move the flashing
cursor to the graph position.
Use the function keys, the JOG control to
select the TEMP-.
The thermocouple used is selected at the
same time.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
Method
Method
Flashing curso
r
(1) Setting the measurement mode
Flashing curso
r
(2) Setting the measurement range
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to set the
measurement range.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
Select the thermocouple type, drift correction and reference junction
compensation to be used.