User Manual

233
────────────────────────────────────────────────────
9.10 Setting the 8937 VOLTAGE/TEMP UNIT
────────────────────────────────────────────────────
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to set the digital
filter.
Selection
Selection
Flashing curso
r
(3) Setting the digital filter
：Digital filter is enabled.
(Measurement range: 500μ to 2 mV)
：Digital filter is disabled.
Digital filter：ON
NOTE
When the digital filter has been set to ON and the measurement range is
changed to one other than 500
μV/DIV to 2 mV/DIV, the digital filter is
automatically turned off. To turn on the digital filter, perform the setup
procedure from the beginning.