User Manual

230
────────────────────────────────────────────────────
9.9 Setting the Display Screen
────────────────────────────────────────────────────
9
.9.3 Direct Channel Setting
Press the DISP key to call the DISPLAY
screen.
Enter the Channel No. using the CH&NUM
key, then press the CH
ENT
key, the
POSITION key, or the RANGE key to
display the input window for the selected
channel.
The zero position and measurement range
can be set for the selected channel using
the POSITION and RANGE keys.
Using the JOG control, the display can be
turned on and off and the waveform
display color can be set.
Press the CH
ENT
key to finalize the inputs.
When a channel number is entered using
the CH&NUM key before the CH
ENT
key is
pressed, the screen shifts to Direct
Channel Setting display for the next
channel as soon as the inputs are
finalized.
Method
Method
NOTE
When input channels are to be set using the CH.SET key, the following
operations cannot be provided:
Copying channel settings
Variable function: ON/OFF（Input value can be changed）