User Manual

228
────────────────────────────────────────────────────
9.9 Setting the Display Screen
────────────────────────────────────────────────────
9
.9.1 Entering by CH.SET key
DISPLAY SCREEN
Setting the analog
channel 1 to 16
Setting the
full-span 1 to 16
Setting the analog
channel 17 to 32
Setting the
full-span 17 to 32
Setting the logic
channel A to H
OFF
Waveform Display Color
Waveform Display Graph Position
Unit name
Measurement Range
Magnification/Compression Ratio
Vernier function
Zero Position
Low-Pass Filter
Full span
（Channel copy can not be carried out）
Setting the analog channels
Setting the Variable Function
Full span display
Variable Function
（Input value can be changed）
can not set function ON/OFF
Setting the logic channels
Waveform Display Color
Waveform Display Graph position
Press the CH.SET key, toggle the input screen.
DISPLAY SCREEN
9
.9 Setting the Display Screen
Pressing the CH.SET key, enables the measurement conditions for each
channel on the display screen to be set or changed.
It is possible to make the settings, while monitoring the waveforms in real
time on the DISPLAY screen . For details on settings, refer to section 9.3.