User Manual

221
────────────────────────────────────────────────────
9.8 Comment Function (SYSTEM 3)
────────────────────────────────────────────────────
9
.8.1 Title Comment Input
Screen: COMMENT (SYSTEM3
)
Press the SYSTEM key to call up the
SYSTEM3 screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：Standard printout is performed.
：Setting item is printed.
Selection
Selection
Method
Method
：Comment is printed.
：Both item and comment are
printed.
When the flashing cursor is moved with
the CURSOR keys, the following function
key indication appears.
：Display the comment input window
.
：Clear the currently displayed
comments.
Selection
Selection
For details on comment input, see Section
9.8.4.
When "COMMENT" or "SET &
COMMENT" is selected, the comments are
printed. (see Section 13.5).
Flashing curso
r
Flashing curso
r
9
.8 Comment Function (SYSTEM 3)
・Title comment input is described.
・Three types of title comment are available.
(1) SET: Function, time axis range, magnification/compression ratio along the
time axis, date and time of trigger
(2) COMMENT: Comment of up to 40 characters
(3) SET & COMMENT: Both (1) and (2)